Key Product Features
- Ultra fast response for methane leaks from Gas Distribution Networks
- Methane specific (no false positives)
- Built in self-test and calibration functions
- Controlled interference polarisation spectrophotometer (CIPS)
The DP-IR is the latest of a new generation of leak survey instruments from GMI that will greatly improve the productivity and safety of a walking/mobile survey. The Detecto Pak-Infrared (DP-IR™) is a highly advanced technology capable of detecting methane, without false alarming on other gases.
The DP-IR functions by using an infra-red optical gas detection system. This instrument is intended to replace the current surveying equipment using the traditional flame ionisation with next generation technology utilising a simple light beam, eliminating the need for expensive gas cylinders and refill systems. It is designed to be selective to detecting methane only, and will not false alarm on other hydrocarbon gases.
The DP-IR operates under a variety of environmental conditions, including cold or hot weather. Its rugged design will stand up to normal field use and operating conditions.
- Ultra fast response for methane leaks from Gas Distribution Networks
- Controlled interference polarisation spectrophotometer (CIPS)
- Methane specific (no false positive)
- Digital methane detection (DMD)
- Built in self-test and calibration functions
- Continuous audio tone relative to gas concentration
|
Measuring Ranges
|
Resolution
|
|
0-10,000 ppm
1-100% Vol. Gas
|
0-1000 ppm
1000-10,000 ppm
1-100% Vol. Gas
|
1 ppm
5 ppm
0.5%
|
|
Certification
|
Environment
|
|
EN 61326-1
Conducted Emissions Class B EN 61326-1
Radiated Emissions Class B EN 61000-4-2 4kV/8kV
ANSI C63.4 Class B EN 61000-4-3 3 V/M
FCC 47 CFR Part 15 Class B
|
Temperature:
-18 deg.C to 50 deg.C (0 to +122 deg.F)
Humidity:
5 - 95% RH non-condensing
|
|
Power Supply
|
Physical Properties
|
|
Internal rechargeable Li-ion battery or external 12v DC car battery with
power conditioner
8 hours at 0ºC (32ºF) without backlight on
Battery Charger:
External, in-line, 110 - 240v AC, 50/60 hertz
6 hours maximum to full charge
|
Dimensions:????????
Weight: 2.6 kg (5.6 lbs)
IP54 sealed (water splash and dust resistant)
|
|
|
|
|
|
High Sensitivity for Fast Efficient Leak Survey
|